DP 85 Breathable Insulating Render
Baumit DP85 breathable insulating render for insulating internal and external masonry walls where damp is an issue and space is restricted.
Where is it used?
Both internally of externally and is ideal for use in old buildings where vapour permeability is important.
How is it used?
Surfaces should be clean, dry and free of dust and salts. Baumit DP85 should be mixed with clean tap water and mixed with a plaster whisk to a smooth creamy, lump free consistency and applied by hand or by projection plastering machine. Baumit DP85 can be applied at a minimum of 30mm or up to 50mm in one coat. Further coats of Baumit DP85 can be applied to bring the maximum thickness up to 100mm. Each coat should be flattened off and the surface left textured. Allow 24-48 hours between coats.
Once cured a 5mm coat of Baumit MC55 with Baumit StarTex mesh should be applied before any finish coats.
How much will you need?
9kg bag of Baumit DP85 will cover up to 1m2 at 50mm thickness.